Perhaps ，the public think Boyin digital printing machines are just cold machines, but in the eyes of Boyin , they are babies who need to be cared for. Next, I will introduce you how to maintain the digital printing machine in winter.
Pay attention to the operating room environment
Above all, winter means low temperatures. The most obvious effect of temperature reduction on the digital printing machine is the nozzle, which is prone to “blockage”, resulting in broken wire skipping, and this phenomenon will be solved after the nozzle is cleaned. This is because the viscosity of the ink increases as the temperature decreases, and the ink droplets condense on the spray hole.
At the same time, the winter temperature is low, the relative humidity will be lower, and the dry air can easily lead to bad printing of the digital printing machine, which may lead to damage of the nozzle and the motor in serious cases.
Therefore, we must pay special attention to the temperature and humidity value of the operation room. The suitable temperature for digital printing machine is 25°C-28 °C, and the humidity value is between 50% and 70%. At the same time, in the winter environment, do not place the digital printing machine in the outdoor environment, if the temperature of the digital printing machine operating room is low, you can appropriately use air conditioning to increase the temperature and humidification.
Post time:Nov-12-2023